Pillow packing machine manufacturer's product price details

Pillow packing machine manufacturer's product price details:Pillow packing machine is prone to failure, and a failure if not professional knowledge is difficult to repair. Whether the product is expensive or not is closely related to the materials used by the manufacturer, and the frequency of the product is very high. But for the use of the product more assured in the future, in the purchase of the need to choose a regular manufacturer, and in the operation of the time must also be in accordance with the instruction manual!

Pillow packing machine in the use of the process of what kind of failure?

First, the temperature is too high, the speed is too slow, envelop outer heat resistance is poor, the seal will appear wrinkle marks maintenance method is to adjust the speed, reduce the temperature, change the film material.

Second, the air pressure is not right, the cylinder swing rod is loose, the heating temperature is low, the hot press roll and the transmission roll are not parallel to appear when the heat seal is bad, the maintenance method is to adjust the parallelism, adjust the temperature and air pressure to tighten.

Three, the speed is too fast, envelop inner layer thermal sealing is poor, when the temperature is too low, sealing leakage or not firm, the maintenance method is to slow down the speed, raise the temperature, replace the film material.

And it should be noted that the induction aviation plug must be inserted before the power supply, and lock the screw; Do not use metal cover and container, and do not press the start button on the metal surface, otherwise the machine will be damaged; During the working process, touch the surface of the induction head frequently to check whether it is overheated. If hot hands are found, stop heating and work after cooling; There will be high pressure in pillow-type packaging body, the bottom plate has electricity, maintenance must pay attention to, so as to avoid personal danger.

Four, the knife base is too high or too low, the packaging speed is too fast, push rod and cutting knife is not synchronized, the cutter will cut on the product maintenance method is to reduce the packaging speed, adjust the height of the end sealing parts, make the center of the sealing knife in the middle of the height of the product.

Five,The color of the film color label is too light, and the film drives to slip. When the tracking of the color label is not opened, the cutting position will deviate from the color label. In the man-machine interface, change the tracking mode to “ Tracking cutting & throughout; .

The solid state breaker is burnt out, the temperature control meter is damaged, and the thermometer cannot control the temperature when the thermocouple is damaged.

Tips: pillow packaging machine products born so far, has been used in many industries, the development of products and social progress is closely related. Driven by the development of science and technology, the performance of the product is constantly improved, so the frequency of use is very high. In order to use the product more assured in the future, when buying the need to choose a regular manufacturer, and in the operation must also be in accordance with the instruction manual!