Pillow packing machine is out of order. Can you repair it

Five majorPillow Packing Machinery maintenance method

1. the temperature is too high, the speed is too slow, envelop outer heat resistance is poor, the seal will appear wrinkle marks maintenance method is to adjust the speed, reduce the temperature, change the film material.

2. The tool base is too high or too low, the packaging speed is too fast, when the push rod and the cutter are not synchronized, the cutter will cut on the product maintenance method is to reduce the packaging speed, adjust the height of the end sealing parts, make the center of the sealing knife in the middle of the product height.
3. The color of the film color label is too light, and the film drives to slip. When the tracking of the color label is not opened, the cutting position will deviate from the color label. In the man-machine interface, change the tracking mode to “ Tracking cutting & throughout; .

4.The solid state breaker is burnt out, the temperature control meter is damaged, and the thermometer cannot control the temperature when the thermocouple is damaged. The maintenance method is to replace the electric couple, replace the temperature control meter and replace the heating element.

5. the speed is too fast, envelop inner layer thermal sealing is poor, the temperature is too low seal will appear leakage or not firm, the maintenance method is to slow down the speed, raise the temperature, replace the film material.

The beginning of China's packaging machinery

Packaging machinery China starts relatively late, in the 70 s, the Beijing commercial machinery research institute after the Japanese packaging machinery, complete created the first packaging machine in China, after 20 years of development, China packaging machinery has become one of the top ten industries in mechanical industry, for China's packaging industry rapid development provides a strong guarantee, some packaging machinery to fill the domestic blank, already can basically meet the demand of domestic market, some products and exports. But at the present stage, China's exports of packaging machinery are less than 5% of the total output value, while imports are roughly equal to the total output value, far from that of developed countries.